Rivets of different materials have different calorific value. In order to protect the mould, different oils are needed. Speaking of this, we will explain for you from a professional point of view what kind of oil is used for stainless steel rivets, aluminum rivets, copper rivets and iron rivets respectively. We said before that rivets of different materials have different calorific value. Through our observation and demonstration for many years, the calorific value of stainless steel rivets is larger, while that of copper rivets is slightly smaller. In stainless steel rivets, therefore, these two rivets are suitable for use with high concentration of drawing oil, while aluminum rivets have low calorific value, so they use low concentration of oil, while iron rivets are between the two types of rivets, with general calorific value. Therefore, both oil and drawing oil can be used. In addition, the bigger the size of rivets, the greater the calorific value. Therefore, when the size of aluminum rivets and iron rivets is too large, the drawing oil should also be used as lubricant! Many manufacturers use oil as lubricating oil regardless of the material, so the rivets produced have poor performance and high defective rate, and the price is on the contrary expensive. Therefore, it is often more reliable to find professional rivet manufacturers!

Although the choice of oil is only a small detail in rivet production, the details often determine success or failure! The same product, others may be a little better than you beat your efforts; the same service, others may be a little more than you take the initiative to waste your efforts. The reason why specialty is called specialty is that they can do better in detail than most enterprises. We are a professional rivet manufacturer!